Facility Info

Portable Welding and Repair Truck and Trailer

18,600 square feet across four buildings in Tomahawk, Wisconsin. Carbon and stainless work is kept physically separate, every production bay runs two five-ton overhead cranes, and the laser department handles tube and sheet in-house.

Facility Layout

Walls separate the bays to prevent cross-contamination between carbon and stainless.

Bay Size Cranes Notes
1st Bay / Carbon 40' x 120' Two 5-ton 16' overhead door
2nd Bay / Stainless 40' x 120' Two 5-ton 16' overhead door
3rd Bay / Laser 40' x 125' Two 5-ton 17.5' pick height, 16' overhead door
4th Bay / Stainless Fab 40' x 120' None —
18,600 Square feet
4 Bays, carbon and stainless separated
6 Five-ton overhead cranes
12kW Flat and tube laser

Equipment

Laser Cutting

  • 6kW Tube laser
  • 12kW Flat laser / tube laser combo

Plasma Cutting

  • 6' x 12' High-definition CNC plasma table — 300 amp Hypertherm power source, rated for a 2" pierce and a 3.125" edge start in carbon

Forming

  • 195 Ton x 12' CNC press brake — Wila tooling
  • 150 Ton x 8' press brake — approx. 1/4" carbon plate at 7'
  • 5ft Plate Roller
  • 66 Ton H press

Sawing and Drilling

  • T-Drill collaring machine
  • Marvel vertical band saw
  • 4" and 8" George Fisher saws

Turning and Finishing

  • Orbital weld lathes
  • 18" diameter lathe
  • OD pipe polisher
  • Industrial pipe threader — 1/2" to 4"
  • Air-powered grinding and polishing tools

Handling and Positioning

  • Six 5-ton overhead cranes — two per bays 1,2, and 3
  • Positioning equipment — positioners and parts spinners at each weld station
 
Contact Us to Start a Project